Magnetek Flex 12RS System Informações Técnicas descarregar pdf (Página 38)

Flex M Engineered Receiver Instruction Manual

October 2014

Page 38 of 49

7. GEN 1 RF/CPU CHANNEL DIP SWITCH SETTINGS

The channel can be set on the RF/CPU module via the Bank 2 dip switches. The following shows the dip

switch settings for each of the channels available for each RF/CPU Module option.

NOTE: See section 3.8 for instructions on how to remove the CPU/RF module from the din rail and how to

remove the PCB from the module housing.

Channel Frequency SW4 SW5 SW6 SW7 SW8

902.30 MHz DOWN DOWN DOWN UP DOWN

904.10 MHz UP DOWN DOWN UP DOWN

904.30 MHz DOWN UP DOWN UP DOWN

905.10 MHz UP UP DOWN UP DOWN

905.50 MHz DOWN DOWN UP UP DOWN

905.70 MHz UP DOWN UP UP DOWN

906.60 MHz DOWN UP UP UP DOWN

908.70 MHz UP UP UP UP DOWN

908.90 MHz DOWN DOWN DOWN DOWN UP

909.10 MHz UP DOWN DOWN DOWN UP

910.10 MHz DOWN UP DOWN DOWN UP

910.70 MHz UP UP DOWN DOWN UP

911.00 MHz DOWN DOWN UP DOWN UP

911.20 MHz UP DOWN UP DOWN UP

912.00 MHz DOWN UP UP DOWN UP

914.20 MHz UP UP UP DOWN UP

914.40 MHz DOWN DOWN DOWN UP UP

914.60 MHz UP DOWN DOWN UP UP

914.80 MHz DOWN UP DOWN UP UP

915.80 MHz UP UP DOWN UP UP

917.40 MHz DOWN DOWN UP UP UP

923.20 MHz UP DOWN UP UP UP

927.00 MHz DOWN UP UP UP UP

927.30 MHz UP UP UP UP UP

Table 1. CHANNEL DIP SWITCH SETTINGS FOR 900MHZ PART 15 RF/CPU MODULE

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 48 49

Sem comentários

Magnetek Flex 12RS System Informações Técnicas Página 38