Magnetek Flex 12RS System Informações Técnicas descarregar pdf (Página 35)

Flex M Engineered Receiver Instruction Manual

October 2014

Page 35 of 49

4.10.1 DIGITAL INPUT MODULE LED OPERATION

When the Flex M system is supplying power to the Digital Input module, there is an LED that indicates the

power and communication status of the Digital Input module.

Figure 35. GEN2 Digital Input Module LED Placement

 OK LED

o Solid indicates module communication with system is good

o 3 Blinks indicates read/write error to attached CPU module

Additionally, there are 8 LEDs labeled 1 through 8 on the Digital Input module. When the LED is on, this

indicates that the module is receiving a signal/input at that input.

 LED1

o Digital Input 1 is active (non-zero)

 LED2

o Digital Input 2 is active (non-zero)

 LED3

o Digital Input 3 is active (non-zero)

 LED4

o Digital Input 4 is active (non-zero)

 LED5

o Digital Input 5 is active (non-zero)

 LED6

o Digital Input 6 is active (non-zero)

 LED7

o Digital Input 7 is active (non-zero)

 LED8

o Digital Input 8 is active (non-zero)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 48 49

Sem comentários

Magnetek Flex 12RS System Informações Técnicas Página 35