Magnetek Flex 12RS System Manual de Instruções descarregar pdf (Página 26)

Flex PRO / Flex M Pre-Engineered Radio Control System Instruction Manual

April 2012

Page 26 of 42

Additionally, there are 8 LEDs labeled 1 through 8 on the Analog I/O module. When the LED is on, this

indicates that the module is sending/receiving a signal on that input or output.

LED1 = Analog Output 1 is Active (non-zero)

LED2 = Analog Output 2 is Active (non-zero)

LED3 = Analog Output 3 is Active (non-zero)

LED4 = Analog Output 4 is Active (non-zero)

LED5 = Analog Input 1 is Active (non-zero)

LED6 = Analog Input 2 is Active (non-zero)

LED7 = Analog Input 3 is Active (non-zero)

LED8 = Analog Input 4 is Active (non-zero)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Sem comentários

Magnetek Flex 12RS System Manual de Instruções Página 26