Magnetek Flex 12EX System Manual de Instruções descarregar pdf (Página 18)

Flex 12EX System Instruction Manual

December 2013

Page 18 of 48

52134 867

FUNCTION

LED 1LED 2LED 3LED 4

4.1.2 Push Button Functions with LED Display Settings

4.1.2.1 Standard Push Button (Transmitter Toggle)

Set transmitter toggle (latching output relay) function by adjusting the 8-position function

dip-switch located on the backside of the transmitter encoder board (refer to Fig. 09

below). The LED 1 through LED 4 shown inside the shaded box (see below) illustrates

which LED on the transmitter will light up when the designated push button (PB7 ~ PB12)

is pressed.

(Fig. 09)

DIP PB7 PB8 PB9 PB10 PB11 PB12

00000000 Normal Normal Normal Normal Normal Normal

00001001 Normal Normal Normal LED 4 Normal Normal

00001010 Normal Normal LED 3 LED 4 Normal Normal

00001011 Normal LED 2 LED 3 LED 4 Normal Normal

00001100 LED 1 LED 2 LED 3 LED 4 Normal Normal

00001101 Normal Normal Normal Normal Normal LED 4

00001110 Normal Normal Normal Normal LED 3 LED 4

00001111 Normal Normal Normal LED 2 LED 3 LED 4

00010000 Normal Normal LED 1 LED 2 LED 3 LED 4

* PB7…PB12 → Push button number

* Normal → Normal momentary contact

* LED 1…LED 4 → Transmitter toggled with designated LED Display

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Sem comentários

Magnetek Flex 12EX System Manual de Instruções Página 18